Odorant Injection
OdorEyes Bellows Injection Pump
Odorant Injection

The BIPSeries of Injection Pumps are displacement pumps used to inject a liquid chemical into a pressurized pipeline. Odorant, acid, methanol and inhibitor chemicals are just a few of the products that can be injected with the BIP Series of pumps. The BIP incorporates a Teflon bellows that separates the chemical being injected from the working side of the pump, as well as from the outside environment. Thus, the hydraulic piston and seals are not subjected to the harsh environments of the chemicals which will in-turn prolong seal life and minimize the downtime needed for repairs. Unwanted leaks, odors and spills are maintained within the bellows, maximizing environmental protection.

 

Download more information.
 
OdorEyes EcoSystem A/T
Odorant Injection

The EcoSystem Series takes the quality and performance you’ve come to expect from OdorEyes to a new, higher level. EcoSystem A/T systems feature the RCS 2000 Gateway Controller from IIT. The OdorEyes RGC application features User Date Reports with Alarms and User History Reports in pulse event, hourly, daily or monthly log time frames. You select the time frame to match your needs. The central controller system monitors gas flow to the tank. It creates a computer record of how much odorant was put in and has electronic tank level transmitters so the operator knows at all times the level of odorant in the tank and how much has been used. The alarm data log shows a date/time stamp for all alarm occurrences and their clearing. This permits you to monitor not only deviations from normal operations, but response time to any detected problems.

 

Download more information.
 
OdorEyes EcoSystem B/U
Odorant Injection

TheEcoSystem B/U Pulse Gas Odorizer takes bypass odorizing to a new level. Using today’s technology, we can overcome the problems associated with the old conventional buried bypass odorizer. The most significant advance in bypass technology has been the introduction of the bypass odorizer. Rather than relying on a constantly changing differential pressure across a restriction in the pipeline, the pulse-bypass odorizer pulses a known volume of gas through the odorant tank proportional to flow. This makes it a true flow tracking odorizer. The unique control technology incorporated in the EcoSystem B/U can provide continual odrization even in theevent of loss of meter signal or power failure. The pulse bypass system can operate accurately down to zero flow and will never vapor lock. It is ideal for stations that may periodically cease operation or go to extremely low flow. When the flow returns or increases it will remain accurate and reliable. Additionally, the system can be equipped with a temperature sensor in the odorant tank. The bypass flow is adjusted to compensate for changes in odorant vapor concentration due to temperature changes. This OdorEyes feature allows the tank to be either buried or above ground and remain accurate.

 

Download more information.
 
OdorEyes EcoSystem Genesis Unit
Odorant Injection

Environmentally Clean Odorizer Systems from OdorEyes Technologies are designed to provide safe, reliable and clean odorization of natural gas in your pipeline. Looking for a system that meets the needs of local low flow rate locations without all the overkilll and expensive options? From very basic needs to systems requiring optional alarms, shut-offs and flow measurements, the Genesis Unit can be designed to fit your specifications. The EcoSystem Genesis Unit is the low cost answer for your odorization needs. The EcoSystem Genesis Unit can be set up in either Pulse By-Pass or Injection style configurations.

 

Download more information.
 
OdorEyes Gas Odorant Monitor-Transmitter
Odorant Injection

The OdorEyes Monitor-Transmitter automatically measures the concentration of any commonly used mercaptan odorant in natural gas or vaporized LPG (liquified petroleum gas). The OdorEyes fixed monitor utilizes an electrochemical sensor which is exposed to a flowing sample at user selected intervals. The measurement signal can be recorded to verify the accuracy with which mercaptan has been added to odorless fuel by an odorizer system.

 

Download more information.
 
More Articles...
<< Start < Prev 1 2 3 4 Next > End >>

Page 2 of 4